Waters’ Edge Metropolitan District Nos. 1–5

Turn the dial to select programming features.

OFF - Disables automatic irrigation.

AUTO RUN - Watering occurs automatically.

DATE/TIME - Set the current date and time.

MANUAL STATION - Start watering any one station or all stations immediately.

SEASONAL ADJUST - Adjust run times from 5% to 200%.

SENSOR - Set controller to obey or ignore a rain sensor.

RUN DAYS - Set watering day options for each program.

RUN TIMES - Set run times for each program.

START TIMES - Set up to 4 start times per program.

PROGRAM SELECT BUTTON - Select Program A, B, or C.

– / + BUTTONS - Adjust program settings.

BACK / NEXT BUTTONS - Move through programming options.

Start watering immediately for all programmed stations.

1. Turn the dial to MANUAL STATION.
2. Press – or + to set a run time.

Press and hold ► (Start) or turn the dial to AUTO RUN to begin the test.

Start watering immediately for one station.

1. Turn the dial to MANUAL STATION.
2. Press ► to display the Manual Station screen.
3. Press ◄ or ► to select a station.
4. Press – or + to set a run time.
5. Press and hold ► or turn the dial to AUTO RUN to start the selected station.

Start watering immediately for one program.

1. Turn the dial to AUTO RUN.
2. Press Program Select to choose Program A, B, or C.
3. Press and hold ► to start the selected program.

The display shows:

• A blinking sprinkler icon
• The active station number or program
• The remaining run time

Turn the dial to OFF for three seconds until the screen displays OFF.

During watering, the display shows:

• A blinking sprinkler icon
• The current program
• The remaining run time

Example display:

• Program: A
• Station: 1
• Remaining run time: 10 minutes

Turn the dial to OFF to:

• Stop automatic irrigation
• Cancel active watering immediately

Caution: Watering will not occur if the controller remains in OFF mode.

1. Turn the dial to DATE/TIME.
2. Press ◄ or ► to select the setting you want to change.
3. Press – or + to change the value.
4. Press and hold – or + to change values faster.

1. While MINUTES is blinking, press ►.
2. Press – or + to choose:
   • 12-hour format
   • 24-hour format
3. Press ► to return to the time settings.

Each program can have up to 4 start times.

1. Turn the dial to START TIMES.
2. Press Program Select to choose Program A, B, or C (if needed).
3. Press ◄ or ► to select a start time slot.
4. Press – or + to set the start time.
   • Make sure AM/PM is correct if using 12-hour format.
5. Press ► to set additional start times.

Run times can be set from 1 minute to 6 hours.

1. Turn the dial to RUN TIMES.
2. Press Program Select to choose Program A, B, or C (if needed).
3. Press ◄ or ► to select a station.
4. Press – or + to set the run time for that station.
5. Press ► to continue setting run times for additional stations.

Use this option to water on specific days.

1. Turn the dial to RUN DAYS.
2. Press Program Select to choose Program A, B, or C (if needed).
3. Press – or + to set the selected day:
   • ON = water on that day
   • OFF = do not water on that day
4. The cursor automatically moves to the next day.
5. Press ◄ or ► at any time to move between days manually.

Important

If Sunday is selected and you press ►, the controller enters Cyclic Watering mode (covered in Advanced Programming).

If you do not want Cyclic Watering:

1. Press ◄.
2. Continue using Custom Days mode.